Winstrip® Air Prune Nursery Trays makes soil blocks obsolete. These trays bring all the benefits of soil blocks without any of the downside.  They are simply the best, longest lasting trays made.

These Seed Starting Plug Tray Flats come as singles, in ten packs, or 400 tray pallets. Winstrip trays are 10" x 20"

Made in the USA by us with BPA-Free recycled plastic.

Buy Two Winstrip Pallets get $15% Off the Third

Winstrip Nursery Trays or Seed Starting Plug Trays

Mix Kits for Home Gardeners

Kit A -

Contains Six Winstrip® Nursery Trays

Two of Each 50, 72, and 128

kit B -

Contains Seven Winstrip® Nursery Trays

Three 50 / Two of each 72 and 128

And Seven Solid Bottom Trays

Kit Combinations Cannot be Changed.

Clear high impact injection molded Dibble Board for Winstrip and most 1020 trays. Each Dibbler both dibbles and acts as a plug popper for Winstrips. With 1020 trays, acts as a Dibbler.

Unlike all other dibblers, this one is not individual dibbles glued or snapped to a board. It is injection molded so the dibbles are integrated with the board. This results in a premium product that is stiff and not prone to breakage. It will give you a lifetime of use.

The Winstrip® Dibbler/Popper is the only one that works with Winstrip® Nursery Trays and is manufactured by Neversink Farm. 

Like everything we manufacture, this is a premium professional product. 

Mixed Mini Wini® Seed Starting Kit for Home Gardeners. An entire garden in one tray. Premium quality will last a lifetime. Seedling trays with bottom trays.

Contains Eight Mini Wini Trays

• Two Large
• Four Medium
• Two Small

Also included are Two Indestructible Bottom Trays

• One Solid
• One Vented

*This product ships free within the contiguous United States

Used to dibble the cells creating a dimple to place the seed in the soil. This centers the seed and in a place where it can be covered with soil easily. This helps with germination  

Same device can be used as a plug popper to pop out seedlings from below.

For use with Mini Wini or Winstrip Trays. Carabiner included so you can carry it with you into the field.

S - Winstrip 128

M - Winstrip 72

L - Winstrip 50

Indestructible Heavy Duty 1020 Bottom Trays for those either watering from below or starting plants in their home.

Works perfectly with Winstrip Trays and Mini Winis. It is also great for growing shoots and fits most 1020 cell tray. We have both solid, for bottom watering and vented (with holes). Can be used in combination with vented nested into solid to keep plugs from sitting in water constantly.

Made in the USA by us with BPA-Free recycled plastic.

The best paperpot and/or microgreen trays produced, hands down. These heavy duty professional trays will last a lifetime and they are produced to the highest specifications.

They also save room in your propagation house over other paperpot trays as their nesting takes up half the space.

The solid bottom trays are designed to nest perfectly under our "with holes" germination tray only. The combination provides both watering and wicking. The top tray doesn't just sit in the water.

overall dimension 12” x 24”

10 Pack - $7.50 per Tray

20 Pack - $6.75 per Tray

Pallet of 400 - $4.99 per Tray

• Manufactured by Neversink Farm in TN, USA
• Food grade, BPA free, Recycled Plastic
• UV protected

Buy One Get One at 10% Off

The tray carrier allows you to carry three trays in each hand increasing efficiency six-fold.

There are Three Sizes of Tray Carrier. Each size matches a type of tray. Width of the tray determines the Carrier to be used.

• Carrier for Winstrip (10" wide trays)
• Carrier for Standard 1020 (11" wide trays) Accommodates all major brands of vacuum formed 1020s with their bottom tray.
• Carrier for Paperpot Trays or Indestructible (12" wide trays) (compatible with both our paperpot trays and all other major brands of paperpot trays)

Material is zinc galvanized steel which will change over time, and develop a great patina.

Special limited edition Stainless Steel will last decades and remain unchanged.

Tray carrier does not come with any trays.

Dibbler for 264 cell paperpot. Manufactured by Neversink Farm. Unlike all other paperpot dibblers, this one is not individual dibbles glued to a board. It is injection molded so the dibbles are part of the board. Resulting in a premium product that is stiff and not prone to breakage.